View 3433-650250WAY_355859.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

.100 .100 Latch/Ejector Header
4 Wall, Straight & Right Angle, High Temp Option
S Military (with 3M's 3518 polarizing key) and centerbump polarization S Optional ejector latches S Mounting holes for securing header to board S Solder tail and wrap tail options S Optional polarizing posts S High temperature option
Date Modified: October 19, 1999
19
TS-0772-02 Sheet 1 of 4
Physical
Insulation Material: Glass Filled Polyester (PBT) Glass Filled Polyester (PCT -- High Temp Option) Flammability: UL 94V-0 Color: Gray, Standard Beige (High Temp Option) Marking: 3M Logo, Part Identification Number and Orientation Triangle Contact Material: Copper Alloy Plating Underplate: 100 [ 2.54 m ] Nickel -- QQ-N-290, Class 2 Wiping Area: Gold -- MIL-G-45204, Type II, Grade C Solder Tails: 200 [ 5.08 m ] 60/40 Tin Lead -- MIL-P-81728 Wrap Tails: Gold Flash, Standard
Electrical
Current Rating: 1 A Insulation Resistance: >1 x 109 at 500 Vdc Withstanding Voltage: 1000 Vrms at Sea Level
Environmental
Temperature Rating: -55C to +105C High Temp Process Rating: Maximum 235C, with 90 seconds over 215C
UL File No.: E68080
3M Interconnect Solutions Division
6801 River Place Blvd. Austin, TX 78726-9000 For technical, sales or ordering information call 800-225-5373
.100 .100 Latch/Ejector Header
-X0XX Header with No Ejector/Latch -X5XX Header with Short Ejector/Latch for 3M Sockets without Strain Relief
4 Wall, Straight & Right Angle, High Temp Option
-X6XX Header with Long Ejector/Latch for 3M Sockets with Strain Relief -X4XX Header with Ejector only
(R) (R)
.08 [2.0] .08 [2.0] .424 .010 [ 10.77 ] .97 Ref [24.6] .573 .010 [ 14.55 ] 1.07 Ref [27.2] 1.07 Ref [27.2]
.37 Ref [9.4]
.46 Ref [11.7]
.42 Ref [10.7] Note: This Ejector is a Nickel Plated Zinc Alloy Casting.
.025 .002 Sq Typ [ 0.64 ] .24 [6.1]
2X .100 [2.54] (See Note 2) .020 [0.51] D .28 [7.1]
.30 [7.6] .100 Ref [2.54] C L "Y" F Typ Position 1 Orientation Triangle Notch A (See Table 1 & Note1) Notch B (See Table 1) .16 [4.1] A Notch C (See Table 1 & Note 1) B E .010 .12 [3.0]
.25 [6.4]
.100 Ref [2.54] Position 1 B
.34 [8.3]
Section A-A
(Straight) .025 .002 Sq Typ [ 0.64 ]
.21 [5.3]
F Typ
.24 [6.1]
.68 [17.3] .35 [8.9]
.12 [3.0]
C L
"Y"
.30 [7.6]
E .010 .049 Ref [1.24] .100 Ref [2.54]
.020 [0.51] A 2X .100 [2.54] (See Note 2) B C A
.197 [5.00] .20 [5.1]
Section B-B
(Right Angle) TS-0772-02 Sheet 2 of 4
3M Interconnect Solutions Division
6801 River Place Blvd. Austin, TX 78726-9000 For technical, sales or ordering information call 800-225-5373
.100 .100 Latch/Ejector Header
Table 1 Pn Pin Quantity 10 14 16 20 24 26 30 34 40 50 60 64 3M Part Number 3793 3314 3408 3428 3627 3429 3440 3431 3432 3433 3372 3764
4 Wall, Straight & Right Angle, High Temp Option
Dimensions A 1.26 [32.1] 1.46 [37.2] 1.56 [39.7] 1.76 [44.8] 1.96 [49.8] 2.06 [52.4] 2.26 [57.4] 2.46 [62.6] 2.76 [70.2] 3.26 [82.9] 3.76 [95.6] 3.96 [100.7] B 1.105 [28.07] 1.305 [33.15] 1.405 [35.69] 1.605 [40.77] 1.805 [45.85] 1.905 [48.39] 2.105 [53.47] 2.305 [58.55] 2.605 [66.17] 3.105 [78.87] 3.605 [91.57] 3.805 [96.65] C .865 [21.97] 1.065 [27.05] 1.165 [29.59] 1.365 [34.67] 1.565 [39.75] 1.665 [42.29] 1.865 [47.37] 2.065 [52.45] 2.365 [60.07] 2.865 [72.77] 3.365 [85.47] 3.565 [90.55] Table 2 3M Part Number Suffix -5XX2 -6XX2 -5X03 -6X03 -5X05 -6X05 Pin Cross Section Contact Tail C t t T il Solder Tail for .062 [1.57] Thick PC Board Solder Tail for .094 [2.39] to .125 [3.18] Thick PC Board Wire Wrap Tail for up to 3 Levels of Wire Wrap
or .116 .106 [2.69] [2.95] (See Note 2) G Dia
D .71 [18.0] .91 [23.1] 1.01 [25.6] 1.21 [30.7] 1.41 [35.8] 1.51 [38.3] 1.71 43.43] 1.91 [48.5] 2.21 [56.1] 2.71 [68.8] 3.21 [81.5] 3.41 [86.6]
Polar zat on Polarization Notches Provided BC BC ABC ABC ABC ABC ABC ABC ABC ABC ABC ABC
Dimension E Di i .112 [2.84] .155 [3.94] .61 Ref [15.5]
Dimension F 0.0245 .0005 [0.622] 0.0245 .0005 [0.622] 0.0250 .002 [0.635]
Diagonals 0.028 .001 [0.71] 0.028 .001 [0.71] 0.035 .003 [0.90]
Corner Radii 0.0075 Ref [0.191] 0.0075 Ref [0.191] 0.003 Max [0.08]
Dimension G Di i .035 .003 [0.89] (See Note 3) .035 .003 [0.89] .045 .003 [1.14]
.300 [7.62] Side to Side Stackability
or .116 .106 [2.69] [2.95] .41 (See Note 2) [10.4] Max to Edge of PCB G Dia for Daisy Chain
"Y"
C L
"Y"
C L
Position 1 .100 .003 [2.54] .232 [5.89]
.060 [1.52]
Position 1 .100 .003 [2.54] .352 [8.94]
.029 [0.74]
.100 .003 [2.54]
.100 .003 [2.54]
B
C
Recommended Mounting Hole Pattern
(Straight)
Recommended Mounting Hole Pattern
(Right Angle)
Inch
[mm]
Tolerance Unless Noted .0 Inch .1 .00 .000 .01 .005
Notes: 1. Notches A & C will accomodate 3M Polarizing Keys (3M Part #N3518). 2. Accepts Rear and Front mounting hardware: Rear Entry: #4-24 thread cutting screw, 3M Part #3341-5, .116 [2.95] dia mounting hole Front Entry: (Prior to installation of latch on Straight Versions) #2-56 bolt and nut, 3M Part #3341-6, .106 [2.69] dia mounting hole 3. The recommended PCB hole size for the kinked tail positions on the .112 solder tail connector is .035 .002. Refer to TS-0972 for the positions kinked.
[ ] Dimensions for Reference only TS-0772-02 Sheet 3 of 4
3M Interconnect Solutions Division
6801 River Place Blvd. Austin, TX 78726-9000 For technical, sales or ordering information call 800-225-5373
.100 .100 Latch/Ejector Header
Ordering Information
4 Wall, Straight & Right Angle, High Temp Option
30 Microinches Gold Plated Product XXXXX-XXXX
Product Material: N = High Temp Blank = Standard Tail 02 =Solder Tail for .062 [1.57] Thick Board K2=Kinked Solder Tails for .062 [1.57] Thick Board 03 =Solder Tails for .094 to .125 [2.39 to 3.18] Thick Board 05 = Wrap Posts for up to 3 levels of Wire Wrap (Not available on High Temp version.)
3M Part Number (See Table 1) Shroud and Pin Configuration 5 = 4 Wall, Right Angle 6 = 4 Wall, Straight
Latch/Ejector System 0 = No Latch/Ejector 4 = Roll Pin Ejectors (3M Part # 3505-4) 5 = Short, Snap-In Latch/Ejectors, (3M Part # 3505-30) 6 = Long, Snap-In Latch/Ejectors (3M Part # 3505-31)
15 Microinches Gold Plated Product XXXXX-XXXXUG
Product Material: N = High Temp Blank = Standard Plating Suffix UG = 15 microinch Gold
3M Part Number (See Table 1) Shroud and Pin Configuration 5 = 4 Wall, Right Angle 6 = 4 Wall, Straight
Tail 02 =Solder Tail for .062 [1.57] Thick Board K2=Kinked Solder Tails for .062 [1.57] Thick Board 03 =Solder Tails for .094 to .125 [2.39 to 3.18] Thick Board Latch/Ejector System 0 = No Latch/Ejector 5 = Short, Snap In Latch/Ejectors (3M Part #3505-30) 6 = Long, Snap In Latch/Ejectors (3M Part #3505-31)
TS-0772-02 Sheet 4 of 4
3M Interconnect Solutions Division
6801 River Place Blvd. Austin, TX 78726-9000 For technical, sales or ordering information call 800-225-5373

▲Up To Search▲

Price & Availability of 3433-650250WAY

	To Download 3433-650250WAY Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .